This system will boost mobile signal for any cell phone's Voice and 3G Data on Spark Network in NZ or the 850MHz frequency used by mobile operator in worldwide. Area coverage is effective up to 100sqm.
The mobile signal booster is used for your home, office, basement or building. The kit comes complete with everything you need to increase signal strength and stop dropped calls, it is simple to install, comes with technical support and is despatched promptly.
Applicable Network
Voice -- Spark
3G -- Spark
4G LTE -- No
Kits Included
1. 850MHz Signal Booster
2. External High Gain Panel Antenna
3. Indoor Whip Antenna
4. 10m Low Loss Coaxial Cable
5. AC/DC Power Supply
6. User Manual and parts
7. 30 Days Money Back Guarantee
Shipping Way
1. All orders will be Free Shipping by NZPost, DHL
2. Order Processing time within 1-2days
3. Transport Time about 3days
Technical Specs
Gain ( dB) Uplink Gp=55, Downlink Gp=60
Export power (Po) =15dBm
Pass band ripple =5dB
Guard band rejection (BW-60dB)=42MHz, (BW-70dB)=45MHz
I/O impedance 50 ohm
I/O return loss =-8dB
Intermodulation Attenuation: =-40dBc (Po=13dBm)
Transmission Delay =0.5μs
Ambient temperature -10~50
Power supply AC110~220V + - 10%
Power 12v
Power Use < 5 Watts
Connector N-female type
Diamension 235 x 178 x 25 mm
Easy Installation
1. Fix the outside antenna at higher place where has a signal(1-2bars or better), such as roof.
2. Connect outside antenna to "BTS" Port on the Booster through cable.
3. Connect inside antenna(s) to "User/Mobile" Port on the Booster directly or through cable also.
4. Plug Power Adaptor into AC power socket and finish installation.